Fujitsu PRIMERGY TX1320 M4 - Installing a 2.5-Inch HDD;SSD Module

TX1320 M4 Upgrade and Maintenance Manual 145
Hard disk drives (HDD) and solid state drives (SSD)
7.4.4.3 Installing a 2.5-inch HDD/SSD module
Figure 61: Opening the locking lever
Ê Pinch the green locking clips (1) and open the locking lever (2).
Figure 62: Inserting the 2.5-inch HDD/SSD module
Ê Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
Ê Close the locking lever to lock the HDD/SSD module in place (2).
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.