TX1320 M4 Upgrade and Maintenance Manual 217
11 Processor (CPU)
Safety notes
V CAUTION!
● Do not install unsupported CPUs. For more information on supported
CPUs, see section "Basic information" on page 217.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● When removing or installing CPUs, be careful not to touch or bend
the spring contacts on the CPU sockets.
● Never touch the underside of the CPUs. Even minor soiling such as
grease from the skin can impair the CPU’s operation or destroy the
CPUs.
● For more information, see chapter "Important information" on
page 33.
11.1 Basic information
Supported CPUs
– one Intel
®
Xeon
®
CPU E-21xx, E-22xx, Pentium, or Core i3 up to 95W, up
to 8 cores
– one CPU socket LGA 1151
I For system relevant information, see the hardware configurator of your
server available online at the following address:
http://ts.fujitsu.com/products/standard_servers/index.html
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/
To Next Page
Loading...
