Fujitsu PRIMERGY TX1320 M4 - Removing the Defective TPM; Installing the New TPM; Concluding Steps

TX1320 M4 Upgrade and Maintenance Manual 283
System board and components
14.3.3.2 Removing the defective TPM
Ê Remove the TPM, see section "Removing the TPM" on page 278.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
14.3.3.3 Installing the new TPM
I The TPM spacer is already present on the system board.
Ê Install the TPM, see section "Installing the TPM" on page 276.
14.3.3.4 Concluding steps
Ê Install the system board, see section "Installing the new system board" on
page 309.
Ê "Installing the HDD fan module" on page 167
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 60
Ê "Switching on the server" on page 63
Ê "Resuming BitLocker functionality" on page 87
I You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.