48 Upgrade and Maintenance Manual TX1320 M4
Basic hardware procedures
– Global Error (for non CSS components) events that need to be resolved by
maintenance personnel
– Customer Self Service (for CSS components) error events that may be
resolved by operating personnel
The Global Error indicator and the CSS indicator can be found on the front side
and the rear side of the server.
I In same cases the indicator on the rear is designed as a combined
indicator (Global Error, ID and CSS indicator).
I The indicators also light up in standby mode and after a server restart
due to a power failure.
Ê Check the Global Error indicator and the CSS indicator.
4.1.3 Locating the defective component
After determining the error class by the CSS indicator or the Global Error
indicator (see section "Determining the error class" on page 47), indicators on
the components and onboard indicators on the system board allow you to
identify the defective component.
I For more information, see the "ServerView Suite Local Service Concept
(LSC)" manual.
Possibilities to get more information about the defective component
● Checking the ServerView System Monitor, available on Windows or Linux
based servers with ServerView agents installed.
I For more information, see the "ServerView System Monitor" user
guide.
● Checking the System Event Log (SEL), see section "Viewing and clearing
the System Event Log (SEL)" on page 84.
● Checking the indicators on the components, see section "Connectors and
indicators" on page 319.
● Checking the onboard indicators on the system board using the Indicate
CSS button, see section "Using the CSS button on the system board" on
page 49.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
