Fujitsu PRIMERGY TX1320 M4 - Installing a 2.5-Inch HDD;SSD Dummy Module; Concluding Steps

148 Upgrade and Maintenance Manual TX1320 M4
Hard disk drives (HDD) and solid state drives (SSD)
7.4.5.3 Installing a 2.5-inch HDD/SSD dummy module
V CAUTION!
If the removed HDD/SSD module is not replaced immediately, always
replace a dummy module into the unused HDD/SSD bay to comply with
applicable EMC regulations and satisfy cooling requirements.
Figure 63: Installing the 2.5-inch HDD/SSD dummy module
Ê Push the dummy module into the empty bay until it engages.
7.4.5.4 Concluding steps
Ê "Reassembling" on page 57