Fujitsu PRIMERGY TX1320 M4 - Removing an SFP+ Transceiver Module

178 Upgrade and Maintenance Manual TX1320 M4
Expansion cards and backup units
Installing the secondary SFP+ transceiver module
Figure 86: Installing the secondary SFP+ transceiver module
Ê If applicable, install the secondary SFP+ transceiver module accordingly.
9.3.2 Removing an SFP+ transceiver module
A network adapter is equipped with one or two SFP+ (small form-factor
pluggable) transceiver modules. SFP+ transceiver modules are hot-pluggable.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less