TX1320 M4 Upgrade and Maintenance Manual 189
Expansion cards and backup units
Figure 97: Installing a PCI slot cover
Ê Insert a slot cover into the unused PCI slot opening (1).
Ê Fold down slot bracket clamp until it locks in place (2).
9.4.2.5 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 60
Ê "Switching on the server" on page 63
Ê "Resuming BitLocker functionality" on page 87
Ê If applicable, remove the slot bracket, see section "Removing a slot bracket"
on page 174.
To Next Page
Loading...
