Fujitsu PRIMERGY TX1320 M4 - Removing the Heat Sink Variant 2

220 Upgrade and Maintenance Manual TX1320 M4
Processor (CPU)
I This may be necessary due to the adhesive quality of the thermal
paste located between the heat sink and CPU.
V CAUTION!
Pay special attention not to damage any system board components
surrounding the CPU socket.
Ê Lift the heat sink out of the chassis.
Ê Clean residual thermal paste from the CPU surface using a lint-free cloth
and store the CPU in a save place.
11.2.3 Removing the heat sink variant 2
Figure 119: Removing the heat sink variant 2