Fujitsu PRIMERGY TX1320 M4 - Indicator on the ODD

326 Upgrade and Maintenance Manual TX1320 M4
Appendix A
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
15.2.2.2 Indicator on the ODD
I ODDs may have an indicator or not.
Figure 197: Example: Indicator on the ODD
Pos. Indicator Status Description
1
Activity
indicator
off The ODD is inactive.
green on The storage medium is being accessed.