TX1320 M4 Upgrade and Maintenance Manual 163
8Fans
Safety notes
V CAUTION!
● Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
● Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
● The procedure of installation on this notes might change depending
on a configuration of options.
● For more information, see chapter "Important information" on
page 33.
8.1 Basic information
The PRIMERGY TX1320 M4 server features two different HDD fan modules.
I Since the system fan is not redundant, it has to be replaced immediately
in case of defects or pre-failure events.
To Next Page
Loading...
