Fujitsu PRIMERGY TX1320 M4 - Indicator on Hot-Plug PSU

TX1320 M4 Upgrade and Maintenance Manual 333
Appendix A
15.2.3.3 Indicator on hot-plug PSU
Figure 202: Indicator on hot-plug PSU
Pos. Indicator Status Description
1
PSU status
indicator
flashing
green
The server is switched off, but mains
voltage is present (standby mode).
green on
The server is switched on and operating
properly.
flashing
orange
An overload has been detected. The
PSU is still running, but failure might be
imminent.
orange on
An PSU failure has been detected.
Possible causes:
– Over/under voltage
– Overheating
– Fan failure
0