Fujitsu PRIMERGY TX1320 M4 - Replacing the RDX Drive; Preliminary Steps; Removing the Defective RDX Drive; Installing the New RDX Drive

TX1320 M4 Upgrade and Maintenance Manual 259
Accessible drives
12.3.3 Replacing the RDX drive
12.3.3.1 Preliminary steps
Ê "Locating the defective server" on page 47
Ê "Removing backup and optical disk media" on page 69
Ê "Suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 51
12.3.3.2 Removing the defective RDX drive
Ê Remove the RDX drive, see section "Removing the RDX drive" on
page 256.
12.3.3.3 Installing the new RDX drive
Ê Install the RDX drive, see section"Installing the RDX drive" on page 251.
12.3.3.4 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 60
Ê "Switching on the server" on page 63
Ê "Resuming BitLocker functionality" on page 87
Field Replaceable Unit
(FRU)
Hardware: 10minutes
Tools: Phillips PH2 / (+) No. 2 screw driver