TX1320 M4 Upgrade and Maintenance Manual 57
Basic hardware procedures
4.5 Reassembling
V CAUTION!
● Before attaching the covers, ensure that no unnecessary parts or
tools are left inside the server.
● In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the server cover is removed.
● For more information, see chapter "Important information" on
page 33.
4.5.1 Installing the server cover
Figure 10: Closing the server cover
Ê Fit the server cover on the chassis (1).
Ê Slide the server cover towards the rear until the locking lever grips (2).
Ê Fold down the locking lever (3).
To Next Page
Loading...
