336 Upgrade and Maintenance Manual TX1320 M4
6 Flash update is failed A processing bar and an error message is
displayed on the screen.
This beep code is only an information.
8 Platform PCI resource
requirements cannot
be met
Ê Check the connection of your expansion
card whether it is installed in a correct
slot.
Ê Enter the BIOS setup menu.
Ê Open the Advanced menu.
Ê Check in the PCI Subsystem Settings
the parameter Above 4G Decoding.
This parameter must be set to Enabled.
# of
Beep
Description Action
To Next Page
Loading...
