6.4 Power distribution board 155
6.4.1 Installing the power distribution board 155
6.4.2 Removing the power distribution board 158
6.4.3 Replacing the power distribution board 161
7 Hard disk drive (HDD) / solid state disk (SSD)
163
7.1 Safety notes 163
7.2 Basic information 164
7.3 Handling HDDs or SSDs without installation frame 166
7.3.1 2.5-inch HDD/SSD and 2.5-inch installation frame 166
7.3.2 2.5-inch HDD/SSD and 3.5-inch installation frame 168
7.3.3 3.5-inch HDD and 3.5-inch installation frame 170
7.4 3.5-inch HDD configurations 172
7.4.1 Equipping the 3.5-inch HDD bays 172
7.4.2 Overview backplanes 172
7.4.3 Overview of configurations 173
7.4.3.1 Configuration with up to four HDD modules 173
7.4.3.2 Configuration with up to eight HDD modules 174
7.4.3.3 Configuration with up to 12 HDD modules 175
7.4.4 Installing 3.5-inch HDD modules 177
7.4.5 Removing 3.5-inch HDD modules 179
7.4.6 Replacing a 3.5-inch HDD module 182
7.4.7 Replacing a 3.5-inch HDD SAS backplane 183
7.4.8 Upgrading to 8x 3.5-inch HDD configurations 195
7.5 2.5-inch HDD/SSD configurations 202
7.5.1 Overview backplanes 202
7.5.2 Overview of configurations 208
7.5.2.1 Configurations with up to eight HDDs/SSDs 208
7.5.2.2 Configurations with up to 16 HDDs/SSDs 209
7.5.2.3 Configuration with up to 24 HDDs/SSDs with HDD extension
box 211
7.5.2.4 Configuration with up to 32 HDDs/SSDs with HDD extension
box 213
Content
Upgrade and Maintenance Manual TX2550 M5
To Next Page
Loading...
