Fujitsu PRIMERGY TX2550 M5 - Page 256

Figure 153: Installing the SAS expander board holder (C)
▶
Connect six SAS cables C11 to all backplanes and the SAS expander
board:
Connector on backplane
Connector on SAS expander board
BP1 "X9" "X10"
BP2 "X9" "X11"
BP2 "X10" "X12"
BP3 "X9" "X13"
BP4 "X9" "X14"
BP4 "X10" "X15"
Hard disk drive (HDD) / solid state disk (SSD)
256 Upgrade and Maintenance Manual TX2550 M5