Cabling the 8x 2.5-inch HDD/SSD extension box
Figure 163: Connecting the 8x 2.5-inch HDD/SSD extension box
▶
Connect the following cables to the SAS expander board and HDD
backplane:
1 2x SAS cable C11 on connectors "X14" and "X15" on SAS expander
board
2 SAS cable C11 from connector "X14" on SAS expander board to
connector "X9" on backplane
3 Power cable C6 on connector "X40" on backplane
4 SAS cable C11 from connector "X15" on SAS expander board to
connector "X10" on backplane
Hard disk drive (HDD) / solid state disk (SSD)
270 Upgrade and Maintenance Manual TX2550 M5
To Next Page
Loading...
