EasyManua.ls Logo

Fujitsu PRIMERGY TX2550 M5 - Page 293

Fujitsu PRIMERGY TX2550 M5
636 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 179: PCIe cable routing
Lay the PCIe cables over the system air duct.
Install 2.5-inch PCIe SSDs SFF in the PCIe extension box, see "Installing
2.5-inch HDD/SSD modules" on page
218
.
The PCIe SSDs SFF are installed in the same frames as the 2.5-inch
HDD/SSD modules.
For the cable plan, see "Appendix B" on page 589
.
Concluding steps
"Reassembling" on page 68
.
"Connecting the power cord" on page 82.
"Switching on the server" on page 83.
Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page 136. Select the
corresponding system name depending on the used controller.
Hard disk drive (HDD) / solid state disk (SSD)
TX2550 M5 Upgrade and Maintenance Manual 293

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2550 M5

Related product manuals