Fujitsu PRIMERGY TX2550 M5 - Page 360

Figure 234: Installing the slot cover
▶
Insert a PCI slot cover into the unused PCI slot opening (1).
▶
Clip on the PCI slot cover clamp.
▶
Fold down the locking handle on the PCI slot cover clamp until it locks in
place (2).
Concluding steps
▶
If applicable, "Installing the PCI air duct" on page
89
.
▶
"Reassembling" on page 68.
▶
"Connecting the power cord" on page 82.
▶
"Switching on the server" on page 83.
▶
"Resuming BitLocker functionality" on page 130.
Expansion cards and backup units
360 Upgrade and Maintenance Manual TX2550 M5