Concluding steps
▶
"Installing the top cover" on page 70
▶
Install the support bracket and rack mounting rails in the rack, see the "Rack
Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
The document is available online.
▶
"Installing the server in the rack" on page 72
.
▶
Connect all external cables.
▶
"Connecting the power cord" on page 82
▶
"Switching on the server" on page 83
▶
Update the chassis information of your server on the Chassis ID EPROM
integrated into the front panel board. For more information on how to obtain
and use the ChassisId_Prom Tool, see "Using the Chassis ID Prom Tool"
on page 136.
▶
Change the chassis model setting to "rack model", see "Specifying the
chassis model" on page 141.
Converting a floorstand model to a rack model
544 Upgrade and Maintenance Manual TX2550 M5
To Next Page
Loading...
