AB CSR key
Sets A/B cursors ( p.102)
STOP key
Stops measurements
1 press: Measurement stops
after the set recording
length
2 presses:Stop measurement
See: "Stop Action" ( p.257)
START key
Starts measurements
The key lights green during mea-
surement.
See: "Start Action" ( p.257)
Inner: Jog
Outer
: Shuttle
Scrolls waveforms (
p.106)
DISP key
Displays the Waveform
screen
STATUS key
Displays the Status screen
FILE key
Displays the File screen ( p.80)
F key
Select setting items
PRINT key
Prints waveforms and lists
(
p.89)
ESC key
Cancels an operation.
Removes the displayed dialog and
window
CURSOR key
Moves the cursor up, down, left and
right on the screen.
KEY LOCK:
Press and hold the right and left
CURSOR keys for three seconds to
disable key operations.
To cancel key-lock, hold the keys
again for three seconds.
TRIG.SET key
Displays the trigger settings
window on the Waveform
screen.( p.151)
CH.SET key
Displays the channel settings
window on the Waveform
screen. ( p.49)
SYSTEM key
Displays the System screen
(
p.255)
CHAN key
Displays the Channel screen
Manual Trigger key
Issues a manual trigger event.
(
p.165)
WAVE key
Assigns the Jog & Shuttle knobs to
waveform scrolling. (
p.106)
FEED key
Feeds paper
COPY key
Prints a hard copy of the
display screen (
p.98)
HELP key
Opens help
information (
p.15)
AUTO key
Starts auto-range
measurement (
p.58)
Operating Keys
Lights up during media
access.
SAVE key
Saves data to storage media. ( p.65)
Turns dialog box display during Auto Save on or off.
To Next Page
Loading...