Label Explanation
Located on each side of the substrate path, close to the PPS gear,
and on the dual r
oll center support
Risk of trapped
îžngers. Do not touch gears while moving. Danger
that your hands may become trapped between gearwheels.
Located internally on the substrate path and internally on the
righ
t cover; for maintenance/service personnel only
Hazardous moving part. Keep away from moving printhead
carriag
e. When printing, the printhead carriage travels back and
forth across the substrate.
Located on the dryer module; for maintenance/service personnel
onl
y
Light radiation hazard. Infrared (IR) radiation is emitted from this
prin
ter. Do not modify the dryer enclosure. You are recommended
not to look directly at the lamps when they are on.
The dryer enclosure limits radiation in compliance with the
requirements of the exempt group of IEC 62471:2006,
Photobiological safety of lamps and lamp systems.
Located on the condensation collector bottle and the printhead
cl
eaning roll carriage
You are recommended to wear gloves when handling ink
car
tridges, printhead cleaning cartridges, and the printhead
cleaning container.
Located at the rear, on the left cover
Sound level could exceed 70 dBA in some print modes. Hearing
pr
otection may be required.
8 Chapter 1 Introduction ENWW
To Next Page
Loading...
Need help?
General
