◦
The Print, Canc
el, and Print adjustment buttons
◦
The job queue
◦
The print preview and job settings
●
The Substrate pane includes the Substrate load/unload, Enable collector, and move carriage beam
buttons; and information about how the current substrate is loaded.
Change the language of the Internal Print Server
When the Internal Print Server starts, it uses the language selected in the Windows Regional and Language
Options. To change the selected language:
1. Open the Control Panel from the start menu.
2. If you are using the Category View of the Control Panel, open the Clock, Language, and Region category.
3. Open the Regional and Language Options.
4. In the Formats tab, change the current format to correspond with the language you want.
5. Press the OK button.
The change takes eect when Windows is restarted.
Chang
e the units of measurement in the Internal Print Server
To change the units of measurement in the Internal Print Server, select the Tools > Preferences > Units. You
can change the units of length and temperature.
Set the Internal Print Server preferences
To change the Internal Print Server's preferences, select Preferences from the Tools menu. In the Preferences
window, you will see four tabs.
General tab
●
Units o
f length and temperature
●
Remarks (to add as a footer to the printed le)
●
Font of footer text
20 Chapter 2 HP Internal Print Server ENWW
To Next Page
Loading...
Need help?
General
