6. Clean the contacts.
CAUTION: Do no
t use the printhead interconnect wiper to clean the nozzles!
Finish
o cleaning the printhead contacts
1. Wait until the contacts are dry.
2. Put back the printheads, each in the same slot from which it came.
3. Close the service position window.
4. Turn on the printer in the correct way for maintenance operations: see
Turn the printer on on page 160.
Replace a spindle valve
Risk of trapped ngers
For more safety information, see Safety precautions on page 2
ENWW Replace a spindle valve 267
To Next Page
Loading...
