Content Quantity
HP Latex 3000 Cleaning Kit 1
Upgrade 5 Printhead cleaning blades A 1
Machine Grease and Oil kit SERV 1
NOTE: The contents of the kit may vary.
NOTE: Some keys are provided with the printer. See Safety precautions on page 2 to identify the one you
may require for maintenance operations.
Use the keys only for accessing the intended doors and keep them always under your control. Store them in a
safe and secure place.
Maintenance tools recommended but not provided
Spiral steel scourer, for Clean the bottom
of the carriage, the drying glasses, and the
line sensor on page 167; Clean the drying
module quartz glass and air outlet
on page 221; and Clean the ink deposits
on page 173.
Absorbent all-purpose cloth, for cleaning
covers.
Isopropyl alcohol, for general cleaning
NOTE: If you are in an area (such as
California) that regulates VOC cleaning and
maintenance uids, instead of isopropyl
alcohol use a VOC-certiîžed cleaner such as
a properly diluted Simple Green All-
Purpose Cleaner.
Vacuum cleaner, handy or normal, with
nozzle accessories; for Clean the rear scan-
axis beam on page 229.
Flashlight, for general use. Folding steps, for general use.
A at screwdriver.
156 Chapter 8 Hardware maintenance ENWW