EasyManuals Logo

HP Latex 3000 Series User Manual

HP Latex 3000 Series
363 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #355 background imageLoading...
Page #355 background image
A Printer messages
Occasionally you may see messages such as the following in the Internal Print Server window.
There are two types: text messages, which are more informative, and messages containing numerical codes,
which mean that the printer has detected a problem or malfunction.
When one of these messages appears, follow any instructions provided by the printer, and consult the tables
below. If you feel in doubt about the correct response, or if you have followed the recommendation but the
problem persists, call your service representative. See HP Customer Care Centers on page 341.
Table A-1 Text messages
Message Recommendation
{Color} cartridge has expired You are advised to replace the ink cartridge. See Remove an ink
cartridge on page 113.
{Color} cartridge is altered You are advised to replace the ink cartridge. See Remove an ink
cartridge on page 113.
{Color} cartridge is low on ink Be ready to replace the ink cartridge soon.
{Color} cartridge is missing Install the correct ink cartridge. See Insert an ink cartridge
on page 114.
{Color} cartridge is non-HP ink You are recommended to install an HP ink cartridge for best
performance.
{Color} cartridge is out of ink Replace the ink cartridge. See Remove an ink cartridge
on page 113.
{Color} printhead is missing Install the correct printhead. See Insert a printhead on page 119.
{Color} printhead out of warranty The printhead’s warranty has ended, because of the length of
time it has been in operation, because of the volume of ink used,
or because non-HP ink has been used in the system. See the
limited warranty document.
An error has occurred in printhead detection Remove the printhead, clean any ink from the electrical
connectors on the printhead (do not try to clean the nozzles), and
reinsert the printhead. See The Internal Print Server recommends
replacing or reseating a printhead on page 334.
Checking îž­le system After a dirty power oîž«, the printer performs a îž­le system check,
which will take some minutes.
Checking printer The printer is completing checks and cool-down cycle after
îž­nishing a job.
Clean drop detector spittoon You are advised to clean the ink deposits. See Clean the ink
deposits on page 173.
Cleaner roll jam. Go to the Internal Print Server and select the Ink System menu,
then Check cleaner roll. Pull out the printhead cleaning roll
assembly, raise the pinchwheels, wind the roll forward manually,
then lower the pinchwheels and push the assembly back into the
printer.
ENWW 347

Table of Contents

Other manuals for HP Latex 3000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Latex 3000 Series and is the answer not in the manual?

HP Latex 3000 Series Specifications

General IconGeneral
BrandHP
ModelLatex 3000 Series
CategoryPrinter
LanguageEnglish

Related product manuals