EasyManuals Logo

HP Latex 3000 Series User Manual

HP Latex 3000 Series
363 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
3. Stick it to the platen, covering the substrate-advance sensor.
4. Load the substrate that you want to check.
5. Open your RIP software.
6. Obtain the test le from the printer’s built-in computer: C:\Users\hplatex\Documents\HP IPS
\InkTrespassingCheck\Ink_trespassing_check.pdf.
7. Print the test le using the number of passes and substrate preset that you intend to use in future with
this substrate (or a similar prole in terms of ink limit).
8. Unload the substrate.
9. Remove the strip of self-adhesive vinyl from the platen.
10. Look at the self-adhesive vinyl you have taken from the platen.
If the strip is completely white (has no ink on it), the tested substrate is non-porous and may be
used for printing as described in this guide.
If the strip is non-white, the tested substrate is porous and may be used only with the ink collector
installed.
11. Clean the print zone, see Clean the print zone on page 166.
Supported HP substrates
Category Substrate Color
calib.
Applications
Self-adhesive
vinyl
HP Air Release Adhesive Gloss Cast Vinyl
Without liner: 50 microns (2 mil) • 100 g/m² • 45,7 m (150 ft)
With liner: 241 microns (9.5 mil) • 260 g/m² • 45,7 m (150 ft)
Yes Vehicle wraps, car/bus/
track eets, signs
HP Permanent Gloss Adhesive Vinyl
Without liner: 121 microns (4.8 mil) • 150 g/m² • 45,7 m (150 ft)/ 91,4 m (300 ft)
With liner: 248 microns (9.8 mil) • 270 g/m² • 45,7 m (150 ft)/ 91,4 m (300 ft)
Yes
HP Permanent Matte Adhesive Vinyl
Without liner: 121 microns (4.8 mil) • 150 g/m² • 45,7 m (150 ft)/ 91,4 m (300 ft)
With liner: 248 microns (9.8 mil) • 270 g/m² • 45,7 m (150 ft)/ 91,4 m (300 ft)
Yes
HP One-View Perforated Adhesive Window Vinyl
Without liner: 165 microns (6.5 mil) • 155 g/m² • 50 m (164 ft)
With liner: 406 microns (16 mil) • 288 g/m² • 50 m (164 ft)
No
PVC banners HP Durable Frontlit Scrim Banner
449 microns (17.7 mil) • 535 g/m² • 35 m (115 ft)
Yes Banners, POP, ags,
track covers, wall
murals
Paper
HP PVC-Free Wall Paper
177 microns (7 mil) • 175 g/m² • 30,5 m (100 ft)
Yes POP indoor and
outdoor, windows, bus
shelters, billboards,
wall decorations
HP White Satin Poster Paper
165 microns (6.5 mil) • 136 g/m² • 61 m (200 ft)
ENWW Supported HP substrates 27

Table of Contents

Other manuals for HP Latex 3000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Latex 3000 Series and is the answer not in the manual?

HP Latex 3000 Series Specifications

General IconGeneral
BrandHP
ModelLatex 3000 Series
CategoryPrinter
LanguageEnglish

Related product manuals