Clean the rear scan-axis beam
Risk of burns Crush hazard Risk of trapped
ngers Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, see
Safety precautions on page 2
Prepare to clean the rear scan-axis beam
1. Ensur
e that you have a vacuum cleaner and an absorbent all-purpose cloth (not provided).
2. Ensur
e that the printer is not printing.
3. Ensure that all windows, covers, and doors are closed and remain in their original position.
4. Move the carriage to its leftmost position.
5. Turn o the printer in the correct way for maintenance operations: see
Turn the printer o on page 160.
Clean the rear scan-axis beam
1. Open the ser
vice position window.
ENWW Clean the rear scan-axis beam 229
To Next Page
Loading...
