●
A
lign the registration line (continuous line).
NOTE: To help make the alignment we recommend making a mark with a pen or pencil at the
registration line (1), but on Side B (2). Do not make a mark by cutting with scissors as this can cause the
substrate to come into contact with the printheads.
3. Dene Side B (see Double-sided on page 100) and press the Print button.
NOTE: Before pressing Print, ensure that the correct side is selected.
The printer will automatically detect the registration line and the Side B image will be positioned to
minimize registration errors. This detection occurs automatically after each row detected and an
adjustment is made accordingly.
4. Unload the roll.
View information about the loaded substrate
Information about the loaded substrate is displayed at the bottom of the main screen of the Internal Print
Server.
To see more information, select the Substrate menu and then Settings.
76 Chapter 3 Handle the substrate ENWW
To Next Page
Loading...
