Finish o replacing the drying lamps
1. Close the service position window.
CAUTION: Do not leave anything in the way of the carriage.
2. Turn on the printer in the correct way for maintenance operations: see Turn the printer on on page 160.
3. Dispose of the old lamps according to local regulations.
Clean the drying module quartz glass and air outlet
Risk of burns Crush hazard Risk of trapped
ngers Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, see
Safety precautions on page 2
Prepare to replace the drying lamps
1. Ensur
e that the printer is not printing.
2. Ensure that all windows, covers, and doors are closed and remain in their original position.
3. Move the carriage to the service position.
4. Turn o the printer in the correct way for maintenance operations: see
Turn the printer o on page 160.
5. S
tand on the folding steps and open the service position window.
6. P
erform the following processes for both drying modules (left and right).
ENWW Clean the drying module quartz glass and air outlet 221
To Next Page
Loading...
