◦
Mo
ve up
◦
Move down
●
T
o move the printhead carriage, select Printer tools > Move the printhead carriage.
◦
Move to the service position
◦
Move to the leftmost position
◦
Move to the normal position
●
T
o move the drive roller, select Printer tools > Move the drive roller.
◦
Move (backwards)
◦
Move (forwards)
◦
Stop
Other warnings
◦
Keep your clothing and all parts of your body away from the printer's moving parts.
◦
Avoid wearing necklaces, bracelets, and other hanging objects.
◦
If your hair is long, try to secure it so that it will not fall into the printer.
◦
Do not touch gears or moving rolls during printing.
●
To move the rubber blade, select Printer tools > Move the rubber blade.
◦
Move to service position
◦
Move to normal position
How to turn the printer o and on for maintenance operations
IMPORTANT: When performing maintenance operations, always turn the printer o and on as described
below. Do not use the normal procedure.
IMPORTANT: Strictly follow all the recommended steps, for safety reasons.
NOTE: If your printer is connected to the Internet, you do not need to remember these instructions, because
they are included in the maintenance wizards.
ENWW How to turn the printer o and on for maintenance operations 159
To Next Page
Loading...
