4 Create and manage print jobs
Add a new print job
Each print job must be created in your Raster Image Processor (RIP) and then added to the Internal Print
Server.
When the RIP has generated a print job, its output folder will contain at least three les:
●
An XML le containing job settings
●
A low-resolution TIFF le for use in previews
●
At least one high-resolution TIFF le containing the image to be printed
The output folder should be the shared folder on the Internal Print Server computer that was created during
printer installation. The Internal Print Server cannot take les directly from the network because access
would not be fast enough.
1. Go to the Internal Print Server.
92 Chapter 4 Create and manage print jobs ENWW
To Next Page
Loading...
