8. Place the cover and insert the screws.
9. Close the loading table.
Replace a primer
Risk of burns Crush hazard Risk of trapped
ngers Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, see
Safety precautions on page 2
Prepare to replace a primer
1. Ensur
e that you have the Primer and Latch Kit (CZ056-67396), which is included in the Standard Uptime
Kit (D4J02A).
2. Ensure that the printer is not printing.
3. Ensure that all windows, covers, and doors are closed and remain in their original position.
4. Move the carriage to the service position.
5. Turn o the printer in the correct way for maintenance operations: see
Turn the printer o on page 160.
6. S
tand on the folding steps and open the service position window.
Replace a primer
1. Disc
onnect the primer cable. You have to disconnect a white connector that you can nd at the back of
the printhead whose primer is to be replaced.
236 Chapter 8 Hardware maintenance ENWW
To Next Page
Loading...
