Perform maintenance without Print Care wizards
IMPORTANT: If your printer is not connected to the Internet, you must perform maintenance operations
manually with the help of this guide. Without a connection:
●
The alerts are never reset. Both the Internal Print Server and Print Care always show a red alert for
maintenance status.
●
Tracking the maintenances must be done manually, according to the time and ink usage thresholds
shown in the Summary of maintenance operations on page 162.
●
This guide appears in the Print Care window, for reference, instead of the list of maintenances.
HP strongly recommends an Internet connection as it makes it much easier to deal with the maintenance
tasks of the printer, in addition to providing auto-update of the maintenance procedure and automatic
notication of rmware upgrades. Contact your service representative for more information.
IMPORTANT: Strictly follow all the recommended steps for safety reasons. For example, switching the
printer o protects you from electric shock and hazardous moving parts, among other risks; it may also be
required for other reasons.
The following printer-system movements and processes are required during maintenance operations. The
Printer tools menu in Print Care can be used when the printer is not connected to the Internet. Remember to
follow all the safety precautions.
Risk of burns Crush hazard Risk of trapped
ngers Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, see
Safety precautions on page 2
●
T
o move the carriage beam, select Printer tools > Move the carriage beam.
158 Chapter 8 Hardware maintenance ENWW
To Next Page
Loading...
Need help?
General
