HP Latex 3000 Series

5. Open the curing module.
CAUTION: W
ait for the curing modules to cool down.
6. Wipe the visibl
e part of the protector with a lint-free cloth dampened with isopropyl alcohol.
NOTE: If you are in an area (such as California) that regulates VOC cleaning and maintenance uids,
instead of isopropyl alcohol use a VOC-certied cleaner such as a properly diluted Simple Green All-
Purpose Cleaner.
7. Cl
ose the curing module and latches.
Wipe the ribs of the ink collector modules
1. Wipe the ribs of the ink collector modules with a lint-free cloth dampened with isopropyl alcohol.
NOTE: If you are in an area (such as California) that regulates VOC cleaning and maintenance uids,
instead of isopropyl alcohol use a VOC-certied cleaner such as a properly diluted Simple Green All-
Purpose Cleaner.
2. Cl
ose the front door.
Wipe the protector
While you have the protector out of the printer, wipe all surfaces and check the ribs.
288 Chapter 8 Hardware maintenance ENWW