Label Explanation
Located internally on heating modules and electrical cabinets; for
main
tenance/service personnel only
Electric shock hazard. Disconnect power before servicing. Heating
modul
es and electrical cabinets operate at hazardous voltage.
Located on each side of the in-line slitters
Risk of cutting your
îžngers. Do not touch in-line slitters during
printing.
Handle in-line slitters with care and store them safely in their box
when not used with the printer.
Located internally, close to vacuum fan blades; for maintenance/
ser
vice personnel only
Hazardous moving parts. Keep away from moving fan blades.
Identiîžes
the Protective Earth (PE) terminal for qualiîžed
electricians, and bonding terminals for maintenance/service
personnel only. Earth connection essential before connecting
supply.
Emergency stop buttons
Ther
e are four emergency stop buttons distributed around the printer. If an emergency occurs, simply push
one of the emergency stop buttons to stop all printing processes. A system error message is displayed, and
the fans turn at maximum speed. Ensure that all emergency stop buttons are released before restarting the
printer.
ENWW Safety precautions 9
To Next Page
Loading...
Need help?
General
