For safety reasons, access to the print zone is not permitted while printing is in progress. Therefore, if the
fr
ont door or the loading table is opened, power to the carriage and to the drying and curing module is
disconnected. The print is cancelled and a system error may be displayed.
Main components
The following views of the printer illustrate the main components.
Front view HP Latex 3000 Printer
1. C
ondensation collector bottle
2. Ink cartridges
3. Emergency stop buttons
4. Service position window
5. Built-in computer
6. E-cabinet
7. Power switches, lights, and circuit breakers
10 Chapter 1 Introduction ENWW
To Next Page
Loading...
