Clean the drying glasses
1. Clean the drying glasses with a dampened cloth.
2. Clean the drying glasses with a steel scourer.
3. Continue cleaning the drying glasses with cloth and scourer until they are completely clean.
Clean the line sensor
â–²
Wipe the line sensor with one of the cotton swabs provided in the Printer Cleaning Kit, slightly
dampened with isopropyl alcohol.
NOTE: If you are in an area (such as California) that regulates VOC cleaning and maintenance uids,
instead of isopropyl alcohol use a VOC-certiîžed cleaner such as a properly diluted Simple Green All-
Purpose Cleaner.
170 Chapter 8 Hardware maintenance ENWW
To Next Page
Loading...
Need help?
General
