Prepare to empty the oil collector caps
1. Ensure that you have a ashlight (not provided) as recommended in the maintenance tool set.
2. Ensure that the printer is not printing.
3. Ensure that all windows, covers, and doors are closed and remain in their original position.
4. Move the carriage to the service position.
5. Turn oîž« the printer in the correct way for maintenance operations: see Turn the printer oîž« on page 160.
Empty the oil collector caps
1. Open the front door.
2. Check al
l of the front collectors at the center of the printer.
ENWW Empty the oil collector caps 191
To Next Page
Loading...
Need help?
General
