Prepare to replace an e-cabinet fuse
1. Ensure that you have the E-cabinet PCA Fuses Kit (CZ056-67136), which is included in the Standard
Uptime Kit (D4J02A).
2. Check the Print Care error message log to îžnd out which fuse needs to be replaced.
3. Turn oîž« the printer in the correct way for maintenance operations: see Turn the printer oîž« on page 160.
Replace an e-cabinet fuse
1. Ensure that the printer is not printing.
2. Remove the screws shown below, then remove the rear right cover.
ENWW Replace an e-cabinet fuse 261