Risk of burns Crush hazard Risk of trapped îžngers Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, see Safety precautions on page 2
NOTE: Perform this procedure when the system error 46.02.0Y:06 appears.
Prepare to grease the printhead primers
1. Ensure that the printer is not printing.
2. Ensure that all windows, covers, and doors are closed and remain in their original position.
3. Move the printhead carriage to the service position.
4. Turn oîž« the printer in the correct way for maintenance operations: see Turn the printer oîž« on page 160.
5. Stand on the folding steps and open the service position window.
Grease the printhead primers
1. A
fter lifting the printhead covers, two 'O' rings can be seen that seal the joints between the printhead
cover and printhead.
ENWW Grease the printhead primers 273
To Next Page
Loading...
Need help?
General
