173
...
[RouterB-ui-tty8] quit
# Configure the address for address assignment.
[RouterB] domain system
[RouterB-isp-system] ip pool 1 100.1.1.1 100.1.1.16
[RouterB-isp-system] quit
3. Configure the user PC:
a. Place the modem connected to PC in auto answer mode.
b. Right-click the My Network Places icon and select the Properties option from the popup
menu.
The Network and Dial-up Connections window appears.
c. Right-click the Make New Connection icon and select the New Connection…option from
the popup menu.
The Network Connection Wizard window appears.
d. Click Next.
The Network Connection Type dialog box appears.
e. Select the Dial-up to the Internet option, and click Next.
The Internet Connection Wizard dialog appears.
f. Select I want to set up my Internet connection manually, or I want to connect through
a local area network. Click Next.
The Setting up your Internet connection dialog box appears.
g. Select the I connect through a phone line and a modem option. Click Next.
h. Enter the phone number for dialing to the callback server. Click Next.
i. Enter the username user16 and password user16 that you want to use for PPP
authentication when connecting to the server. Click Next.
j. Assign a name to your new connection and follow the instruction to complete the connection
setup.
k. Open the Network and Dial-up Connections window, right-click the connection just
created, and select the Properties option in the popup menu.
The properties setting dialog box appears.
l. Select the Networking tab. In the Type of dial-up server I am calling list, select PPP:
Windows 95/98/NT4/2000, Internet. Click Settings, select the Enable LCP extensions
box, clear the Enable software compression box, clear the Negotiate multi-link for
single link connections box, and click OK.
m. Turn to the Net
work and Dial-up Connections window. Click the connection icon you just
created. Then, from the menu bar, select Advanced > Dial-up Preferences. In the Dial-up
Preferences dialog box, select the Callback tab and select the No callback option.
n. Double-click the created connection to dial.
Configuration procedure for method 2
On Router C on the dialup side, configure a single dial string. On Router D on the access side, use
the C-DCC approach to set up a connection with Router C through an ISDN PRI interface, and
configure DCC parameters on a dialer interface.
1. Configure Router C:
# Configure a dial access control rule for dialer access group 1. Create a local user account
userd for Router D and configure PPP authentication for the account.
<RouterC> system-view
[RouterC] dialer-rule 1 ip permit
[RouterC] local-user userd
To Next Page
Loading...
Need help?
General
