HPE FlexNetwork MSR Series User Manual

202
Figure 216 Dynamic address pool setup for the DHCP server
5. Configure the dynamic address pool for the DHCP server as described in Table 107.
6. Click Apply.
Table 107 Configuration items
Item Description
Pool Name Name of the dynamic DHCP address pool.
Address Allocation Mode:
Dynamic Allocation
Specify the dynamic address allocation mode for the DHCP address pool.
IP Address
Specify an IP address for dynamic address allocation. A natural mask is
adopted if no subnet mask is specified.
IMPORTANT:
Make sure the IP address is on the same network segment as the IP
address of the DHCP server interface or the DHCP relay agent interface to
avoid wrong IP address allocation.
Subnet Mask

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English