HPE FlexNetwork MSR Series - Page 22

7
Function menu Description
User
level
Attack Defend
Blacklist
Displays and allows you to
refresh the blacklist
information and whether the
blacklist filtering is enabled
or not.
Monitor
Allows you to add, modify,
delete and clear blacklist
entries, and set whether to
enable or disable blacklist
filtering.
Configure
Intrusion Detection
Displays intrusion detection
configuration information.
Monitor
Allows you to configure the
intrusion detection function.
Configure
Application
Control
Application Control
Displays application control
configuration information.
Monitor
Allows you to configure
application control.
Configure
Load Application
Allows you to load an
application and view the
loaded application.
Configure
Custom Application
Displays custom application
information.
Monitor
Allows you to add, modify
and delete a custom
application.
Configure
Advance
Redirection
Displays the configuration
information of redirection.
Monitor
Allows you to add, modify or
remove the redirection
configuration on an
interface.
Configure
Route Setup
Summary
Displays IPv4 route
summary information.
Monitor
Create
Allows you to create IPv4
static routes.
Configure
Remove
Allows you to delete IPv4
static routes.
Configure
User-based-sharing
Displays the IP address,
mask and load sharing
information of an interface.
Monitor
Allows you to modify the
load sharing status and
shared bandwidth of an
interface.
Configure
Traffic
Ordering
Config
Displays IP addresses,
traffic ordering mode and
traffic ordering interval for
interfaces.
Monitor