HPE FlexNetwork MSR Series - Page 23

8
Function menu Description
User
level
Allows you to configure the
traffic ordering mode and
interval.
Configure
Statistics of Inbound Interfaces
Displays inbound interface
traffic ordering statistics.
Monitor
Statistics of Outbound
Interfaces
Displays outbound interface
traffic ordering statistics.
Monitor
DNS Setup
DNS Configuration
Displays DNS
configurations.
Monitor
Allows you to configure
DNS.
Configure
DDNS Configuration
Displays DDNS
configurations.
Monitor
Allows you to add, modify,
and delete a DDNS entry.
Configure
DHCP Setup
DHCP Enable
Displays whether DHCP is
globally enabled or
disabled.
Monitor
Allows you to enable or
disable DHCP.
Configure
DHCP Interface Setup
Displays DHCP server,
relay, or client
configurations on an
interface.
Monitor
Allows you to enable the
DHCP server, relay, or
client on an interface.
Configure
Qo
S
Se
tu
p
ACL
IPv4
Summary
Displays summary IPv4
ACL information.
Monitor
Add
Allows you to add an IPv4
ACL.
Configure
Basic Config
Allows you to configure a
basic rule for an IPv4 ACL.
Configure
Advanced Config
Allows you to configure an
advanced rule for an IPv4
ACL.
Configure
Link Config
Allows you to configure a
link layer rule for an IPv4
ACL.
Configure
Remove
Allows you to remove an
IPv4 ACL.
Configure
Subnet Limit
Displays the subnet limit
configuration information.
Monitor
Allows you to add, modify or
delete subnet limit rules.
Configure