HPE FlexNetwork MSR Series User Manual

281
6. After the configuration process is complete, click Close.
Figure 306 Adding users to user group manager
7. Select manager from the user group list.
8. Select Static for Add Mode.
9. Enter hosta as the username.
10. Enter 192.168.1.11 as the IP address.
11. Click Apply. A configuration progress dialog box appears.
12. After the configuration process is complete, click Close.
Configuring access control for user group staff
1. Select Advanced > Security > Connect Control.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English