313
Figure 328 Common configuration
2. Configure the parameters, as described in Table 147.
Table 147 Configuration items
Item Description
Server Type
Select the type of the RADIUS servers supported by the device:
• Standard—Standard RADIUS servers. The RADIUS client and
RADIUS server communicate by using the standard RADIUS
protocol and packet format defined in RFC 2865/2866 or later.
• Extended—Extended RADIUS servers, usually running on CAMS or
IMC. The RADIUS client and the RADIUS server communicate by
using the proprietary RADIUS protocol and packet format.
Username Format
Select the format of usernames to be sent to the RADIUS server:
Original
format
,
With domain name
, or
Without domain name
.
Typically, a username is in the format of userid@isp-name, of which
isp-name is used by the device to determine the ISP domain for the user. If
a RADIUS server (such as a RADIUS server of some early version) does
not accept a username that contains an ISP domain name, you can
configure the device to remove the domain name of a username before
sending it to the RADIUS server.
To Next Page
Loading...
