HPE FlexNetwork MSR Series User Manual

321
e. To add the primary accounting server, click Add again in the RADIUS Server
Configuration area. select Primary Accounting as the server type, enter 10.1.1.1 as the
IP address, enter 1813 as the port, enter expert as the key, enter expert to confirm the key,
and click Apply.
The RADIUS scheme configuration page refreshes and the added servers appear in the
server list.
Figure 336 RADIUS accounting server configuration page
f. Click Apply.
Figure 337 RADIUS scheme configuration page
3. Enable the Telnet service on the router.
[Router] telnet server enable
4. Configure the router to use AAA for Telnet users.
[Router] user-interface vty 0 4
[Router-ui-vty0-4] authentication-mode scheme
[Router-ui-vty0-4] quit

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English