64
Figure 430 LDAP authentication
3. Configure the LDAP authentication settings as described in Table 183.
4. Click Apply.
Table 183 Configuration items
Item Description
Enable LDAP
authentication
Select this item to enable LDAP authentication.
LDAP Sever IP Specify the IP address of the LDAP server.
Server Port Specify the TCP port number used by the LDAP server.
Version Specify the supported LDAP protocol version.
Authentication Mode
Select an authentication mode for LDAP authentication. Options include
Password
,
Password+Certificate
, and
Certificate
.
User Group Attribute Specify the name of the user group attribute configured on the LDAP server.
Specify conditions to
query user DN
Select this option to query user DN by specified conditions, including the
administrator DN, password, search base DN, and search template.
Admin DN
Enter a user DN that has the administrator rights, which include the right to view the
login user information.
Password
Enter a user password that has the administrator right and enter the password again
to confirm the password.
Confirm Password
Search Base DN Specify a search base DN.
Search Template Specify a search template.
Use a template to
query user DN
Select this option to query the user DN by a template.
User DN template Specify the user DN template to be used to query the user DN.
To Next Page
Loading...
Need help?
General
