HPE FlexNetwork MSR Series User Manual

86
b. Click Add.
The local user configuration page appears, as shown in Figure 461.
c. Enter the user
name usera, enter the password passworda, confirm the password, select
the box before Enable public account, set the maximum number of users for the public
account to 1, and select Permitted as the user status.
d. Click Apply.
Figure 461 Adding local user usera
2. Configure user group user_gr1, assign resource group res_gr1 to the user group and add local
user usera to the user group:
a. Select VPN > SSL VPN > User Management > User Group from the navigation tree to
enter the user group list page.
b. Click Add.
The user group configuration page appears, as shown in Figure 462.
c. Enter the use
r
group name user_gr1.
d. Select res_gr1 on the Available Resource Groups list and click << to add it to the
Selected Resource Groups list.
e. Select usera on the Available Local Users list and click << to add the user to the Selected
Local Users list.
f. Click Apply.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English